 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GaAs SPDT Absorptive Switch with ASIC Driver, DC - 3.0 GHz V 5.00 SW65-0114 Features n n n n n n n n SOW-24 Typical Isolation: 36 dB (2,000 MHz) Typical Insertion Loss: 1.8 dB (2,000 MHz) Integral ASIC TTL/CMOS Driver Plastic, 50 mil Pitch, SOW-24 Lead, Wide Body Low DC Power Consumption 50 Ohm Nominal Impedance Tape and Reel Packaging Available Test Boards Available Description M/A-COM's SW65-0114 is a GaAs MMIC absorptive SPDT switch with an integral silicon ASIC driver. This device is in a 24-lead plastic package. This switch offers excellent broadband performance and repeatability from DC to 3 GHz, while maintaining low DC power dissipation. The SW65-0114 is ideally suited for wireless infrastructure applications. Also available in ceramic package with improved performance. Package outline conforms to JEDEC standard MS-013AD. Electrical Specifications: TA = 25C Parameter Insertion Loss Isolation (All arms off) VSWR Trise Tfall Ton Toff Transients 1 dB Compression Input IP3 VCC VEE ICC IEE Logic "0" Logic "1" Test Conditions DC - 3.0 GHz DC - 3.0 GHz Units dB dB Min -- 33 On 1.7:1 15 50 50 +20 +27 +35 +46 +5.0 -5.0 -- -- -- -- Typical 1.8 36 Off 2.1:1 Max 2.2 -- DC - 3.0 GHz 10%/90%, 90%/10% 50% TTL to 90%/10% RF In-band (peak to peak) .05 GHz .5 - 3.0 GHz Two tone inputs 0.05 GHz up to +5 dBm 0.5 - 3.0 GHz -- -- VCC = +5.0V VEE = -5.0V Iin = 20A max Iin = 20A max 1 -- nS nS mV dBm dBm dBm dBm V V mA mA V V -- ---- -- -- -- -- -- +4.5 -8.0 -- -- 0.0 2.0 2.2:1 50 150 150 -- -- -- -- +5.5 -4.75 4 -1 0.8 5.0 1. Decoupling capacitors (.01 F) are required on the power supply lines. GaAs SPDT Absorptive Switch with ASIC Driver, DC - 3.0 GHz SW65-0114 V 5.00 Absolute Maximum Ratings 2,3 Parameter Max. Input Power 0.05 GHz 0.5 - 3.0 GHz Bias Voltages VEE VCC Control Voltage 4 Operating Temperature Storage Temperature Absolute Maximum +27 dBm +34 dBm -8.5V +5.5V -0.5V to VCC +0.5V -40C to +85C -65C to +125C Pin Configuration Pin # 1 2 3 4 5 6 7 Function RFC GND GND GND GND RF2 GND VEE GND VCC GND C2 Pin # 13 14 15 16 17 18 19 20 21 22 23 24 Function C1 GND GND GND GND GND RF1 GND GND GND GND GND 2. Operation of this device above any one of these parameters may cause permanent damage. 3. When the RF input is applied to the terminated port, the absolute maximum power is +30 dBm. 4. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. 8 9 10 11 12 Truth Table TTL Control Input C1 1 0 C2 0 1 RF Common To: RF1 On Off RF2 Off On Ordering Information Part Number SW65-0114 SW65-0114TR SW65-0114-TB Package Bulk Packaging Tape and Reel (1K Reel) Units Mounted on Test Board Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2 |
Price & Availability of SW65-0114-TB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |